Tite-Seal
Flex ™ Self-Adhesive
Flashing
TITE
SEAL FLEX™ is a flexible, self-adhesive, waterproof flashing
material. Its unique creped surface, andrubberized asphalt mastic
adhesive, expand to conform to radius or curved windows. (Click here to purchase Tite-Seal Flex™ from an online Retailer)
INTENDED
USE: Tite Seal Flex is the ideal moisture barrier for
radius or curved windows.
SURFACE
PREPARATION: Tite Seal Flex will adhere to wood, OSB,
metal, masonry, vinyl, polyethylene, and foam surfaces. All surfaces
should be clean, dry, and free of all loose debris. OSB and masonry
surfaces should be primed with Tite Seal Spray Adhesive, or an
equivalent, prior to application of Tite Seal Flex. TITE SEAL
FLEX should be installed when temperatures are 50°F or higher.
If applied in cool weather, the rolls should be stored in a warm
place until needed, and a heat gun used to warm the substrate
and overlap.
INSTALLATION: Begin
by sealing the bottom window flange first. Measure and cut a piece
of Tite Seal Flex long enough to extend a minimum of two inches
beyond the window on both sides. Tite Seal Flex is easily cut with
a scissors or razor knife. Next, cut a second piece of Tite Seal
Flex long enough to cover the radius, and extend a minimum of 2
inches past the bottom of the window on both side.
LIMITED
WARRANTY: Co-Fair warrants this product to be of merchantable
quality when used and/or applied in accordance with instructions
hereon. Co-Fair does not warrant this product for any purpose
or use other than the general purpose for which it is intended.
Liability under this warranty is limited to the replacement of
defective product as purchased. THIS LIMITED WARRANTY IS ISSUED
IN LIEU OF ALL OTHER EXPRESSED AND IMPLIED WARRANTIES, INCLUDING
THE WARRANTY OF FITNESS, AND EXPRESSLY EXCLUDES LIABILITY FOR
CONSEQUENTIAL DAMAGES.
|
Tite-Seal
Flex™ Self Adhesive Flashing
